HEAT Press Instructions
This is a general guide on how to use a heat press with your Print Magic DTF Transfers. Scroll below to get a step by step guide on how to apply!
What You'll Need:
Print Magic DTF Transfer
HEAT PRESS
parchment paper or teflon
1. PRE-HEAT & Prep
- Turn on your heat press and set the temperature to 300°F
- If your press has a timer, set that to 10 seconds
- Pre-press your garment to remove extra moisture
- Note: This is a general guide for cotton, if you are using blends you can lower the temperature to 275°F and your timer to 8 seconds
2. Place & press
- Place your transfer on the garment
- Press for 10 seconds for cotton / 8 seconds for polyester
3. Peel The Film
- After pressing you can now remove the film right after you press!
- Note: If you feel like the film is not giving, then wait until the transfer is completely cool to the touch and then cold peel and proceed to the next step.
4. Final Press
- After the film is removed, put a piece of teflon(shiny finish) or a piece of parchment (matte finish) on the design.
- Press for an additional 5 seconds
Final Care instructions:
- Wait 24 hours before washing the garment.
- Wash inside out on a cold cycle; tumble dry on low or hang to dry for longer-lasting designs
ORDER YOUR TRANSFERS NOW
Get started with our magical transfers. Whether you are a hobbyist or a screen print shop we have solutions for all. Create your wholesale account now or upload your gang sheet.